Because the inner gear sleeve and the outer gear sleeve of the gear coupling rotate together, there is a slight relative movement. And the pressure between the gears is great, so there is wear. In order to reduce this kind of wear, it is necessary to add grease inside the coupling and fill it up to ensure that the grease enters the meshing part.
Characteristics of coupling grease:
1. Reduce mechanical failure
Lithium-based/polymer thickener can resist the separation of base oil, ensuring sufficient lubrication of coupling components even at high speeds and large centrifugal forces.
2. Reduce maintenance costs
The high-viscosity base oil and effective extreme pressure additives enable this product to form a high-strength lubricating film between the friction surfaces, which greatly reduces the wear caused by heavy load and/or impact load conditions, and can also reduce the misalignment of the axis Coupling wear caused by time.
Three, save operating costs
The special grease for coupling has strong anti-oxidation and anti-separation ability. Compared with ordinary grease, it can extend the lubrication period, reduce the amount of grease and reduce the operating cost.
Fourth, extend the service life of equipment
The special grease for the coupling is added with effective anti-rust and anti-corrosion additives, so that the coupling parts will not rust or corrode under humid conditions.
Applicable scope and applicable temperature
Baoxing coupling gear special grease is suitable for various types of couplings, low-speed and high-speed rotating gear coupling equipment, steel grid couplings and flexible coupling industrial universal joints, and may be affected by Other low-speed industrial equipment affected by severe water pollution and/or shock loads. Wide applicable temperature during continuous operation, long-lasting and stable service life.
